Hybrid Racing K Series 05-06 Speedconverter sensor

If you are running an 05+ transmission that has the speed sensor mounted on the front of the transmission this converter is for you.

 

Why do I need it?

The speed sensor on the 05-06 transmission outputs at a different rate than what the clusters in swapped cars inputs. Up until now most people have either opted to stay away from the 05-06 transmission, use a manual converter that they needed to painstakingly set and dial in, or swap the housing on there transmission.

We decided to make it one step easier and end all of the confusion and problems by creating a simple 4 wire plug and play kit.

 

Is it hard to Install?

The new Hybrid Racing speed converter uses 4 wires and comes preprogrammed with the correct settings. Simply run the wire wires to their respective locations and your cluster is ready to go. The kit will come with complete instructions on where to connect and what pins to move around.

Below are a few screen shots of the product. The converter will come with a heat shrink cover and we suggest that you install it inside your chassis and secure with the provided zip tie.

 

What connector do I need to use on my engine harness?

The 05-06 connector is the best but you can use your 02-04 connector by simply shaving down the guides on the speed sensor.Hybrid Racing 05-06 Speedconverter sensor