Russell  |  Barcode: 087133907291

Russell Stainless Steel Brake Line Kit - 1999-2000 Honda Civic Si EM1 - 684510

Russell 684510 stainless steel braided brake hose kit for the 1999–2000 Honda Civic Si EM1. Includes four direct-fit front and rear hoses with zinc-plated fittings to help reduce hose expansion and improve pedal feel.

Regular price $138.00 USD
Shipping calculated at checkout.


Have a Question?

Not sure if this fits your vehicle? Send us a question before ordering.


Russell 684510 Stainless Steel Braided Brake Line Kit for 1999–2000 Honda Civic Si

Upgrade the factory rubber brake hoses on your 1999–2000 Honda Civic Si with the Russell 684510 Street Legal stainless steel braided brake hose kit.

Russell brake hoses are designed as direct bolt-on replacements for the original rubber hoses. The stainless steel outer braid helps reduce hose expansion under hydraulic pressure, which can provide a firmer and more consistent brake pedal feel during normal street driving or more demanding braking.

This kit is intended for the 1999–2000 Honda Civic Si EM1 with the factory front and rear disc brake system.

Product Features

  • Russell Street Legal brake hose kit
  • Vehicle-specific direct-fit design
  • Fits 1999–2000 Honda Civic Si
  • Stainless steel braided brake hoses
  • Zinc-plated fittings
  • Helps reduce brake hose expansion
  • Helps provide a firmer pedal feel
  • Factory assembled for easier installation
  • Designed for stock brake applications unless otherwise noted
  • Meets U.S. DOT FMVSS 571.106 guidelines
  • Includes 4 brake hoses
  • Russell part number 684510

Vehicle Fitment

Honda Civic Si

  • 1999 Honda Civic Si
  • 2000 Honda Civic Si

Chassis: EM1
Brake configuration: Factory front and rear disc brakes

Important Fitment Notice

This kit is cataloged specifically for the 1999–2000 Honda Civic Si.

Do not assume compatibility with Civic DX, LX, EX, HX, or other trims simply because they share the same chassis generation.

Vehicles that have been modified with the following should have hose length, fitting style, caliper connection, and mounting points verified before ordering.

  • Different front calipers
  • Integra brake conversions
  • Big brake kits
  • Aftermarket calipers
  • Modified brake hose brackets or routing

Stainless Steel Braided Construction

Factory rubber brake hoses are designed to flex with suspension and steering movement, but they can expand slightly when hydraulic pressure is applied.

Russell stainless braided hoses reinforce the flexible brake hose and help limit that expansion. The result can be a more direct and consistent pedal feel compared with old or deteriorated rubber hoses.

Zinc-Plated Fittings

Russell uses zinc-plated fittings on its Street Legal brake hose kits.

The zinc coating helps provide corrosion protection for the fittings, which is especially useful in areas exposed to moisture, road grime, and other environmental contaminants.

What’s Included

  • 2 front stainless steel braided brake hoses
  • 2 rear stainless steel braided brake hoses
  • Vehicle-specific fittings and mounting provisions as supplied by Russell

Total: 4 brake hoses.

Brake fluid, hard brake lines, calipers, pads, rotors, and installation tools are not included unless specifically shown or stated.

Installation Note

Professional installation is recommended.

Before installation:

  • Compare each new hose with the original hose
  • Confirm the fittings and mounting points match
  • Inspect the vehicle’s hard brake lines for corrosion or damaged flare nuts
  • Route each hose exactly as intended
  • Do not twist the brake hose during installation
  • Make sure the hose clears the tire, wheel, suspension, and exhaust through the full steering and suspension range
  • Use the correct flare-nut wrench when disconnecting the factory hard lines

After installation, bleed the brake system using the brake fluid specified by Honda and inspect every connection carefully for leaks.

Do not drive the vehicle until a firm brake pedal has been confirmed and the complete system has been checked for proper operation.

Product Specifications

  • Manufacturer: Russell Performance
  • Product: Street Legal Brake Hose Kit
  • Part Number: 684510
  • Velocity Shop SKU: 684510
  • Vehicle: 1999–2000 Honda Civic Si
  • Chassis: EM1
  • Hose Construction: Stainless steel braided
  • Fitting Finish: Zinc plated
  • Installation Position: Front and rear
  • Number of Hoses: 4
  • Application Type: Vehicle specific
  • UPC: 087133907291
  • Quantity: One complete vehicle brake hose kit



Proposition 65 Warnings.

Cancer and Reproductive Harm. See details below.

https://www.p65warnings.ca.gov/


Items that are not CARB Legal will not be sold and ship to California or CARB states.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Discover
  • Google Pay
  • iDEAL Wero
  • Mastercard
  • PayPal
  • Shop Pay
  • USDC
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.