The aFe Takeda Momentum Cold Air Intake System with Pro 5R filter is designed for the 2022–2026 Honda Civic and Civic Si and the 2023–2026 Acura Integra equipped with the turbocharged 1.5L engine.
The system combines a sealed airbox, dyno-tuned intake tube, and high-flow pre-oiled filter to increase airflow while maintaining a clean, vehicle-specific installation. During aFe testing, the intake produced gains of up to 12 horsepower and 14 lb-ft of torque while flowing up to 71% more air than the factory intake system.
Performance Highlights
-
Dyno-proven gains of up to 12 horsepower
-
Dyno-proven gains of up to 14 lb-ft of torque
-
Flows up to 71% more air than the factory intake
-
Measured airflow of 290 CFM at 7 inches of water
-
Designed to improve airflow and throttle response
-
Produces a more noticeable turbo and induction sound
Pro 5R Performance Air Filter
The included 7.5-inch-tall radial-flow air filter features a 3.5-inch flange and a 360-degree filtration surface.
Its pre-oiled Pro 5R media uses five layers of progressively finer cotton gauze to provide high airflow and strong performance potential. The filter is washable and reusable, and its inverted top provides additional filter surface area.
-
Five-layer cotton gauze filter media
-
Pre-oiled and ready for installation
-
Washable and reusable
-
Designed for maximum airflow and performance
-
Suitable for compatible street and track applications
-
Requires periodic cleaning and re-oiling
Sealed Intake Housing
The one-piece sealed housing is constructed from heat-resistant cross-linked polyethylene. It draws cooler outside air through the factory inlet while helping isolate the filter from hot engine-bay air.
A clear sight window allows the filter to be inspected without removing the housing. An auxiliary air inlet can be left open for additional airflow or closed using the included plug.
Dyno-Tuned Intake Tube
The oversized intake tube is computer-designed and dyno-tuned to improve airflow while maintaining accurate vehicle-specific fitment.
Its cross-linked polyethylene construction resists heat soak and provides long-term durability. A sensor extension harness is included to properly relocate the factory mass airflow sensor.
Installation Features
-
Vehicle-specific bolt-on installation
-
Minimal number of components and fasteners
-
Stainless-steel clamps
-
Bellows-style silicone couplings
-
Mass airflow sensor extension harness included
- Manufacturer-estimated installation time of approximately 30 minutes
Vehicle Fitment
-
2022–2026 Honda Civic 1.5L Turbo
-
2022–2026 Honda Civic Si 1.5L Turbo
-
2023–2026 Acura Integra 1.5L Turbo
Important Fitment Note
This intake is designed only for compatible Civic and Integra models equipped with the turbocharged 1.5L engine.
It does not fit Honda Civic models equipped with the naturally aspirated 2.0L engine, the Honda Civic Type R 2.0L Turbo, or the Acura Integra Type S 2.0L Turbo.
Emissions Disclaimer
This product is not currently CARB exempt and cannot be sold or shipped to California. It is also not approved for use on vehicles registered with the California Department of Motor Vehicles.
Verify applicable emissions regulations before ordering.
Product Information
-
Manufacturer: aFe POWER
-
Product line: Takeda Momentum
-
Part number: 56-70053R
-
Filter type: Pro 5R
-
Filter media: Pre-oiled five-layer cotton gauze
-
Housing material: Cross-linked polyethylene
-
Quantity: One complete intake system
Proposition 65 Warnings.
Cancer and Reproductive Harm. See details below.
Items that are not CARB Legal will not be sold and ship to California or CARB states.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
