aFe Momentum HD Orange Edition Intake for Toyota Land Cruiser J300
Upgrade the airflow and performance of your 2022–2026 Toyota Land Cruiser J300 3.3L turbo-diesel with the aFe POWER 50-70098DN Momentum HD Orange Edition cold air intake system.
This sealed intake is dyno-tested to deliver gains of up to 15 horsepower and 37 lb-ft of torque while increasing airflow by up to 57% over the factory intake. The system flows up to 425 CFM at 7 inches of water for improved engine breathing and throttle response.
The oil-free Pro DRY S filter uses three layers of synthetic media for efficient filtration without the need for filter oil. Its large 360-degree radial-flow design provides increased surface area, longer service intervals, and dependable performance for street and light off-road use.
A heat-resistant orange XLPE housing encloses the filter and uses the factory air inlet to help isolate incoming air from engine-bay heat. The clear sight window allows the filter to be inspected without removing the housing, while an optional auxiliary inlet can be opened for additional airflow or closed with the included plug.
The computer-designed intake tube is constructed from durable, heat-resistant XLPE material and is paired with stainless-steel clamps and a flexible bellows silicone coupling for a secure installation.
Product Features
- Dyno-proven gains up to 15 horsepower
- Dyno-proven gains up to 37 lb-ft of torque
- Outflows the factory intake by up to 57%
- Measured airflow of 425 CFM at 7 inches H₂O
- Oil-free, washable, and reusable Pro DRY S air filter
- Three-layer synthetic filter media
- Large 9-inch-tall 360-degree radial-flow filter
- Sealed orange XLPE intake housing
- Uses the factory air inlet
- Clear filter-inspection window
- Optional auxiliary air inlet with included plug
- Heat-resistant, dyno-tuned XLPE intake tube
- Stainless-steel clamps
- Flexible bellows silicone coupling
- Minimal-hardware direct-fit design
- Approximate 30-minute installation
- Fits right-hand-drive and left-hand-drive vehicles
- Part number 50-70098DN
Vehicle Fitment
- 2022–2026 Toyota Land Cruiser J300
- 3.3L V6 turbo-diesel engine
- Non-U.S. model
- Right-hand-drive and left-hand-drive vehicles
Product Specifications
- Manufacturer: aFe POWER
- Product Line: Momentum HD Orange Edition
- Part Number: 50-70098DN
- Product Type: Sealed cold air intake system
- Filter Type: Pro DRY S
- Filter Media: Three-layer synthetic
- Filter Oil Required: No
- Filter Height: 9 inches
- Filter Design: 360-degree radial flow
- Filter Flange: 5.5 x 3.5 inches
- Housing Material: Orange XLPE
- Intake Tube Material: XLPE
- Filter Included: Yes
- Coupler Included: Yes
- Maximum Flow Increase: 57%
- Measured Airflow: 425 CFM at 7 inches H₂O
- Maximum Horsepower Gain: 15 horsepower
- Maximum Torque Gain: 37 lb-ft
Installation Note
This intake uses a direct-fit design with minimal hardware and is estimated by aFe at approximately 30 minutes for installation. Confirm the vehicle is equipped with the 3.3L turbo-diesel engine before ordering.
Proposition 65 Warnings.
Cancer and Reproductive Harm. See details below.
Items that are not CARB Legal will not be sold and ship to California or CARB states.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
