Hybrid Racing Formula Cold Air Intake – 2017-2021 Civic Type R FK8
Have a Question?
Not sure if this fits your vehicle? Send us a question before ordering.
The Hybrid Racing Formula Cold Air Intake is a complete intake system for the 2017-2021 Honda Civic Type R (FK8). An enclosed XLPE airbox draws outside air through upper and lower feeds, and the filter lifts out through the lid without removing the airbox.
Dyno Results (Hybrid Racing Testing)
On Hybrid Racing's 2019 FK8 test car with the factory ECU, swapping in the 76mm Street intake took the car from 270.2 to 300.2 wheel horsepower with no check engine light. Part of that gain comes from the new MAF signal changing the ECU's fueling, not airflow alone. With each intake properly tuned, the Formula averaged about 7 more wheel horsepower and 8 more lb-ft of torque from 2,500 to 6,800 rpm. Results vary with car, mods, fuel and conditions.
Which MAF Housing?
- 76mm Street – for stock and lightly modified FK8s. Runs on the factory ECU; Hondata FlashPro is recommended to scale the MAF.
- 89mm Race – for high-power builds that are running out of MAF sensor range. Requires Hondata FlashPro or an equivalent tune. Hybrid Racing suggests having your tuner watch MAF voltage from about 400 wheel horsepower.
Both versions share the same airbox, filter, air feeds and coupler, so you can switch from Street to Race later with the Formula Intake Tube Upgrade (HYB-CAI-01-27).
Features
- Enclosed XLPE airbox with upper and lower outside-air feeds
- Reusable high-flow air filter, accessible through the airbox lid for convenient servicing without removing the airbox
- Reuses the factory MAF sensor, mounting points, seal and grommets – no cutting, drilling or bumper removal
- Coupler fits the factory turbo inlet pipe (about 69mm ID); check the size if you run an aftermarket inlet
- Reflective heat shields and stainless hardware
- More turbo and induction sound on throttle
Fitment
- 2017-2021 Honda Civic Type R (FK8), including the 2021 Limited Edition
What's Included
- Intake box and cover with emblem
- 76mm or 89mm MAF housing with matching velocity stack (per option selected)
- Air filter
- Upper and lower supplementary air ducts
- Coupler to factory turbo inlet pipe
- Hardware pack
Installation takes about 1-2 hours with basic hand tools (front wheel and inner fender liner come off to fit the lower air feed).
Proposition 65 Warnings.
Cancer and Reproductive Harm. See details below.
Items that are not CARB Legal will not be sold and ship to California or CARB states.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
































