Konig Rewind 16x7 4x114.3 +0 Silver with Machined Lip Wheel

Give a classic or performance vehicle a period-inspired appearance with the Konig Rewind 16x7 wheel. This version combines a silver center with a machined outer lip, a 4x114.3 bolt pattern and a zero-millimeter offset.

The Rewind features a classic eight-spoke design suited to vintage imports, modern restomods and motorsport-inspired builds. Its one-piece construction and relatively light 15.2-pound weight help deliver classic styling without unnecessary mass.

Features

• Classic eight-spoke wheel design
• Silver center with contrasting machined lip
• Low zero-millimeter offset
• One-piece construction
• Lightweight 15.2-pound design
• Popular style for classic imports, street cars and race-inspired builds
• Limited lifetime structural warranty from Konig

Specifications

• Manufacturer: Konig Wheels
• Model: Rewind
• Manufacturer part number: RW7611400S
• Wheel diameter: 16 inches
• Wheel width: 7 inches
• Bolt pattern: 4x114.3
• Offset: 0 mm
• Center bore: 73.1 mm
• Finish: Silver with machined lip
• Construction: One-piece
• Approximate wheel weight: 15.2 pounds
• Quantity: One wheel

Fitment

This wheel is intended for vehicles using a 4x114.3 bolt pattern that can accommodate a 16x7 wheel, zero-millimeter offset and 73.1 mm center bore.

Fitment note: A matching bolt pattern does not guarantee proper fitment. The zero-millimeter offset may position the wheel farther outward than the factory wheel on many vehicles. Verify brake clearance, suspension clearance, fender clearance, tire size, hub diameter and required lug hardware before ordering.

Hub-centric rings may be required when the vehicle’s hub diameter is smaller than the wheel’s 73.1 mm center bore. Vehicle modifications may also affect fitment.

Recommended Use

Recommended for compatible classic imports, street builds, restomods and motorsport-inspired vehicles requiring a low-offset 4x114.3 wheel.

What’s Included

• One Konig Rewind 16x7 silver wheel with machined lip

Purchase note: This listing is for one wheel. Order a quantity of four when purchasing a complete four-wheel set.

Installation

Professional test fitting and installation are recommended. Confirm that the lug-seat design and lug-thread specifications match the vehicle before installation. Use only compatible wheel hardware and tighten all lug nuts to the vehicle manufacturer’s specified torque using a calibrated torque wrench.

Recheck lug-nut torque after the initial driving period. Never use an impact wrench for final tightening.