This four-piece NGK BKR6E-11 spark plug set provides the quantity required to service select four-cylinder Honda and Acura B-series engines. These standard-replacement resistor spark plugs feature copper center-electrode cores, nickel electrode tips, flat gasket seats, and a factory preset gap of 1.1 mm or 0.044 inch.
NGK BKR6E-11 plugs use a projected-tip design and NGK heat range 6. This set is intended for compatible naturally aspirated applications that call for this exact plug specification. Modified, turbocharged, supercharged, high-compression, or specially tuned engines may require a different heat range or electrode gap.
Features
- Four NGK BKR6E-11 resistor spark plugs
- Suitable for select Honda and Acura B-series four-cylinder engines
- Copper center-electrode core
- Nickel center and ground electrode tips
- Projected-tip configuration
- Single J-gap ground electrode
- Flat seat with crush washer
- Preset 1.1 mm or 0.044-inch electrode gap
- NGK heat range 6
- NGK stock number 2756
Fitment
Acura Integra
- 1992–1993 Acura Integra GS-R with B17A1 engine
- 1994–2001 Acura Integra GS-R with B18C1 engine
- 1997–2001 Acura Integra Type R with B18C5 engine
Honda Civic and Civic Si
- 1999–2000 Honda Civic Si with B16A2 engine
- 1992–1995 Honda Civic SiR II with B16A engine
- 1996–2000 Honda Civic SiR with B16A engine
The Civic SiR applications listed above refer to applicable non-US-market B16A-powered vehicles. Confirm the engine code rather than relying solely on the vehicle model.
Honda Del Sol
- 1994–1997 Honda Del Sol VTEC with B16A3 engine
Engine-Swap Applications
May be suitable for certain LS/VTEC and B20/VTEC engine combinations when the engine builder or tuner specifies NGK BKR6E-11, heat range 6, and the appropriate operating gap.
Engine swaps and modified engines do not have one universal spark-plug requirement. Compression ratio, ignition system, fuel, boost pressure, tuning, and operating conditions can change the required heat range and gap. Confirm the correct plug specification with the engine builder or tuner before ordering.
Specifications
- Manufacturer: NGK
- Part number: BKR6E-11
- NGK stock number: 2756
- Manufacturer heat range: 6
- Thread size: M14-1.25
- Thread reach: 19 mm or 0.750 inch
- Hex size: 5/8 inch or 16 mm
- Preset gap: 1.1 mm or 0.044 inch
- Seat type: Flat gasket seat
- Washer type: Crush washer
- Resistor: Yes
- Resistance: 5,000 ohms
- Center-electrode core material: Copper
- Center-electrode tip material: Nickel
- Ground-electrode material: Nickel
- Ground-electrode configuration: Single J-gap
- Terminal type: Non-removable nut
Recommended Use
Recommended for routine ignition-system service on compatible stock or near-stock Honda and Acura B-series engines that specify NGK BKR6E-11 spark plugs. Replace spark plugs according to the vehicle manufacturer’s maintenance schedule and inspect the removed plugs for abnormal deposits, overheating, oil contamination, or uneven wear.
What’s Included
- 4 NGK BKR6E-11 spark plugs
- Enough spark plugs to service one compatible four-cylinder engine
Installation
Confirm the required part number, heat range, and electrode gap before installation. Although these plugs are supplied with a preset 1.1 mm or 0.044-inch gap, inspect each gap before installation because handling and shipping can affect it.
Install the spark plugs in a cool engine and tighten them according to the vehicle manufacturer’s procedure and torque specification. Avoid overtightening, cross-threading, or damaging the ceramic insulator. Verify that the ignition wires or coil connections are fully seated before starting the engine.
Proposition 65 Warnings.
Cancer and Reproductive Harm. See details below.
Items that are not CARB Legal will not be sold and ship to California or CARB states.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
