NGK G-Power BKR6EGP Platinum Spark Plugs – Set of 4

Service a compatible four-cylinder ignition system with this set of four NGK BKR6EGP G-Power platinum spark plugs. Also identified by NGK stock number 7092, these resistor plugs combine a 0.6 mm fine-wire platinum center electrode with a trapezoidal-cut ground electrode for focused spark delivery and dependable ignitability.

The single-platinum G-Power design offers improved durability compared with conventional nickel spark plugs, while the 98% pure copper core supports heat dissipation across a broad operating range. This package contains four plugs with a factory preset gap of 1.0 mm.

Features

• NGK G-Power single-platinum spark plugs
• 0.6 mm fine-wire platinum center electrode
• Trapezoidal-cut ground electrode helps reduce quenching
• 98% pure copper core supports heat dissipation
• High-grade alumina-silicate ceramic insulator
• Cold-rolled threads help prevent cylinder-head damage
• Trivalent metal shell plating provides corrosion resistance
• Resistor construction helps suppress electrical interference
• Set of four spark plugs

Specifications

• Manufacturer: NGK
• NGK Plug Number: BKR6EGP
• NGK Stock Number: 7092
• Series: G-Power
• Metallurgy: Single platinum
• Thread Size: M14 x 1.25
• Thread Reach: 19 mm / 0.750 inch
• Hex Size: 5/8 inch / 16 mm
• Seat Type: Flat gasket seat with crush washer
• Heat Range: 6
• Factory Preset Gap: 1.0 mm / 0.040 inch
• Center Electrode: Fine-wire platinum
• Ground Electrode: Trapezoidal-cut nickel
• Terminal Type: Non-removable nut
• Resistance: 5,000 ohms
• Resistor: Yes

Fitment

BKR6EGP is used in numerous vehicle and engine applications. Fitment is application-specific and should not be determined by thread size or physical appearance alone.

Fitment note: Confirm NGK plug number BKR6EGP or stock number 7092 through the NGK application catalog for the exact vehicle year, make, model and engine. Some compatible engines require a gap different from the 1.0 mm factory preset.

Recommended Use

Recommended where NGK BKR6EGP is specified as a replacement plug or as a G-Power platinum upgrade from a conventional nickel spark plug. Modified, high-compression or forced-induction engines may require a different heat range or electrode gap.

What’s Included

• Four NGK BKR6EGP G-Power platinum spark plugs

Installation

Confirm the required plug number and gap against the vehicle service information before installation. Measure each plug with a wire-style gap gauge. If adjustment is necessary, move only the ground electrode and do not apply pressure to the fine-wire platinum center electrode.

Install the plugs into a cool engine and start each plug by hand to prevent cross-threading. Tighten according to the vehicle manufacturer’s specified procedure and torque value. NGK recommends installing its plated spark-plug threads dry without lubricant or anti-seize.

Some applications requires more than 4 plugs, please purchase 2 sets

This Part Fits: