Wheel Mate Muteki Closed End Lug Nuts M12x1.5 Purple – 20pc Set

Wheel Mate Muteki Closed End Lug Nuts M12x1.5 – Purple

Wheel Mate Muteki Closed End Lug Nuts are compact spline-drive tuner lug nuts designed for aftermarket wheels using an M12x1.5 thread and 60-degree tapered lug seat.

Made from cold-forged 1008 steel, these closed-end lug nuts combine strength with a lightweight, thin-wall design that works well with the smaller lug openings commonly found on aftermarket performance wheels. The purple finish adds a distinctive appearance while the closed-end design provides a clean finished look.

Features

• M12x1.5 thread pitch

• Purple finish

• Closed-end spline-drive design

• Cold-forged 1008 steel construction

• Oversized 60-degree tapered seat

• Approximately 34mm overall length

• Approximately 20mm outer diameter

• Approximately 36 grams per lug nut

• Compact design for aftermarket wheels with smaller lug openings

• Spline-drive installation key included

• Set of 20 lug nuts

Fitment

Designed for vehicles equipped with:

• M12x1.5 wheel studs

• Aftermarket wheels using a 60-degree conical/tapered lug nut seat

• Lug openings capable of accepting a 20mm diameter spline-drive lug nut

Important: Thread pitch alone does not determine wheel compatibility. Verify your vehicle's wheel stud thread and the lug seat design of your wheels before ordering.

These are not intended for wheels requiring ball-seat, radius-seat, flat-seat, or mag-style lug nuts.

Closed-End Spline Drive Design

The compact spline-drive body allows the Muteki lug nuts to fit many aftermarket tuner and performance wheels where conventional hex lug nuts may be too wide.

The closed-end configuration gives the wheel installation a finished appearance while covering the end of standard-length wheel studs. The oversized 60-degree tapered seat provides a larger contact area against compatible conical-seat wheels.

Recommended Use

Recommended for:

• Aftermarket tuner wheels

• Performance street vehicles

• Custom wheel installations

• Vehicles using M12x1.5 wheel studs

• Wheels with compact lug openings

• Applications requiring a 60-degree conical seat lug nut

What's Included

• 20 Wheel Mate Muteki closed-end lug nuts

• 1 spline-drive lug key / installation adapter

Color: Purple
Thread Pitch: M12x1.5
Seat Type: 60-degree tapered / conical
Length: Approximately 34mm
Outer Diameter: Approximately 20mm
Manufacturer Part Number: 41886L

Installation

Always verify wheel stud thread pitch and wheel seat type before installation.

Thread each lug nut onto the wheel stud by hand before tightening. Use the included spline-drive adapter and tighten the lug nuts in the proper sequence to the vehicle or wheel manufacturer's recommended torque specification.

Do not use an impact wrench for final torque. Recheck lug nut torque after the initial drive following wheel installation.