Wheel Mate Muteki Closed End Lug Nuts M12x1.25 Red – 20pc Set

Wheel Mate Muteki Closed End Lug Nuts M12x1.25 – Red

Wheel Mate Muteki Closed End Lug Nuts are compact spline-drive tuner lug nuts designed for aftermarket wheels using M12x1.25 wheel studs and a 60-degree tapered lug seat.

Constructed from cold-forged 1008 steel, these closed-end lug nuts feature a small-diameter body designed to fit many aftermarket performance wheels with narrow lug openings. The red finish adds a distinctive appearance while the closed-end design provides a clean, finished look.

Features

• M12x1.25 thread pitch

• Red finish

• Closed-end spline-drive design

• Cold-forged 1008 steel construction

• 60-degree tapered / conical seat

• Approximately 34mm overall length

• Approximately 20mm outer diameter

• Approximately 36 grams per lug nut

• Compact diameter for narrow wheel lug openings

• Spline-drive installation key included

• Set of 20 lug nuts

Fitment

Designed for vehicles equipped with:

• M12x1.25 wheel studs

• Aftermarket wheels using a 60-degree conical / tapered lug seat

• Lug openings capable of accepting a compact spline-drive lug nut

Important: Thread pitch alone does not determine wheel compatibility. Verify both your vehicle's wheel stud thread pitch and your wheel's lug seat design before ordering.

These lug nuts are not intended for wheels requiring ball-seat, radius-seat, flat-seat, or mag-style lug nuts.

Closed-End Spline Drive Design

The compact spline-drive body is designed for aftermarket tuner and performance wheels where conventional hex lug nuts may be too wide for the wheel's lug openings.

The closed-end design covers the end of standard-length wheel studs and provides a clean appearance. The 60-degree tapered seat is intended for compatible aftermarket wheels using a conical lug seat.

Recommended Use

Recommended for:

• Aftermarket tuner wheels

• Performance street vehicles

• Custom wheel installations

• Vehicles using M12x1.25 wheel studs

• Wheels with narrow lug openings

• Applications requiring a 60-degree conical seat lug nut

What's Included

• 20 Wheel Mate Muteki closed-end lug nuts

• 1 spline-drive lug key / installation adapter

Color: Red
Thread Pitch: M12x1.25
Seat Type: 60-degree tapered / conical
Length: Approximately 34mm
Outer Diameter: Approximately 20mm
Material: Cold-Forged 1008 Steel
Manufacturer Part Number: 41885R

Installation

Verify wheel stud thread pitch and wheel seat type before installation.

Start each lug nut by hand to avoid cross-threading. Use the included spline-drive adapter for installation and tighten the lug nuts in the proper sequence to the torque specification recommended by the vehicle or wheel manufacturer.

Do not use an impact wrench for final torque. Recheck wheel lug torque after the initial drive following wheel installation.