aFe Momentum GT Orange Edition Pro 5R Cold Air Intake for 2022–2026 Toyota Tundra 3.4L Twin-Turbo

The aFe POWER Momentum GT Orange Edition Cold Air Intake System is a high-flow dual-intake system for the 2022–2026 Toyota Tundra equipped with the 3.4L twin-turbo V6. It combines bright-orange sealed air-filter housings and dyno-tuned intake tubes with a pair of black, washable Pro 5R performance filters.

aFe reports dyno-tested gains of up to 17 horsepower and 19 lb-ft of torque. The system flows up to 17% more air than the factory intake, with measured airflow of 520 CFM at 7 inches H2O. Actual results can vary according to vehicle configuration, operating conditions, fuel, and supporting modifications.

Features

• Complete dual cold-air intake system
• Dyno-tested gains of up to 17 horsepower
• Dyno-tested gains of up to 19 lb-ft of torque
• Flows up to 17% more air than the factory intake
• Measured airflow of 520 CFM at 7 inches H2O
• Two washable and reusable black Pro 5R performance air filters
• Five-layer, pre-oiled cotton-gauze filter media
• 360-degree radial-flow filter construction
• Orange heat-resistant XLPE polymer housings and intake tubes
• Two clear sight windows permit filter inspection without disassembly
• Computer-designed and dyno-tuned intake tubes
• Premium clamps and silicone bellow couplings
• Installs using the factory mounting locations
• aFe POWER part number 50-70100KN

Fitment

• 2022 Toyota Tundra 3.4L Twin-Turbo V6
• 2023 Toyota Tundra 3.4L Twin-Turbo V6
• 2024 Toyota Tundra 3.4L Twin-Turbo V6
• 2025 Toyota Tundra 3.4L Twin-Turbo V6
• 2026 Toyota Tundra 3.4L Twin-Turbo V6

Compatible with applicable gas-powered i-FORCE and hybrid i-FORCE MAX configurations. Confirm the vehicle year, model, and 3.4L twin-turbo engine before ordering.

Black Pro 5R Filters

The system uses two eight-inch-tall, 360-degree radial-flow air filters with three-inch flanges. Each black Pro 5R filter contains five progressively finer layers of pre-oiled cotton-gauze media designed to prioritize airflow and performance.

Inverted filter tops increase the available filtration surface area, while expanded metal supports and protects the filter media. The filters are washable and reusable but require periodic cleaning and re-oiling with the appropriate aFe filter-service products.

Dual Sealed Housings

The orange one-piece housings are constructed from heat-resistant cross-linked polyethylene and use aFe’s filter-to-housing interface to reduce the number of separate components. Each housing incorporates a clear sight window so the corresponding filter can be inspected without removing the intake system.

Recommended Use

Recommended for Tundra owners seeking increased intake airflow, improved engine sound, reusable filtration, and an orange engine-bay appearance. The high-flow oiled Pro 5R media is suited to performance-oriented street and track applications.

What’s Included

• 2 black aFe Pro 5R pre-oiled air filters
• 2 orange XLPE air-filter housings with clear sight windows
• Orange dyno-tuned XLPE intake tubes
• Silicone bellow couplings
• Premium clamps
• Required installation hardware
• Installation instructions

Installation

The Momentum GT system installs using the Tundra’s factory mounting locations. Remove the original intake components and transfer or reconnect the applicable factory sensors and hoses according to the supplied aFe instructions.

Verify that the filters, intake tubes, couplings, clamps, sensors, and hoses are properly positioned and securely fastened before starting the engine. Recheck all connections after the initial drive.

Emissions Notice

This product is not currently CARB exempt. It cannot be sold or shipped to California and cannot be used on a vehicle registered with the California Department of Motor Vehicles. Buyers are responsible for confirming compliance with applicable state and local emissions regulations before ordering or installation.