aFe 2022 Toyota Tundra V6-3.5L (tt) Momentum GT Cold Air Intake System w/ Pro DRY S Filter

The aFe POWER Momentum GT Cold Air Intake System is designed for the 2022–2026 Toyota Tundra equipped with the 3.4L twin-turbo V6, including gasoline and i-FORCE MAX hybrid models. Its dual sealed airboxes, dyno-tuned intake tubes, and two oil-free Pro DRY S filters replace the restrictive factory intake components with a higher-flow system engineered for improved performance and convenient maintenance.

According to aFe’s testing, this intake produces gains of up to 13 horsepower and 17 lb-ft of torque while flowing 11% more air than the factory intake. Measured airflow is rated at 495 CFM at 7 inches of water. Actual results can vary depending on the vehicle, operating conditions, fuel, and other modifications.

Features

• Complete dual-filter cold air intake system
• Dyno-proven gains of up to 13 horsepower and 17 lb-ft of torque, according to aFe testing
• Flows up to 11% more air than the factory intake
• Measured airflow of 495 CFM at 7 inches of water
• Two washable and reusable oil-free Pro DRY S air filters
• Three-layer synthetic filter media requires no filter oil
• Dual sealed one-piece air-filter housings
• Clear sight windows allow filter inspection without removing the housings
• Computer-designed, dyno-tuned XLPE intake tubes
• Heat-resistant cross-linked polyethylene construction
• Premium clamps and silicone bellow couplings
• Installs using the factory mounting locations
• aFe POWER part number 50-70100D

Fitment

• 2022 Toyota Tundra 3.4L Twin-Turbo V6
• 2023 Toyota Tundra 3.4L Twin-Turbo V6
• 2024 Toyota Tundra 3.4L Twin-Turbo V6
• 2025 Toyota Tundra 3.4L Twin-Turbo V6
• 2026 Toyota Tundra 3.4L Twin-Turbo V6

Compatible with applicable gasoline and i-FORCE MAX hybrid models. Confirm the vehicle year, engine, and intake configuration before ordering.

Pro DRY S Filter Technology

The included dual Pro DRY S filters use three progressively layered synthetic media layers to provide filtration and dust-holding capacity without requiring filter oil. Each 8-inch-tall, 360-degree radial-flow filter has a 3-inch flange and protective expanded-metal support.

The filters are washable and reusable. The oil-free media makes them well suited for street and light off-road use while simplifying routine filter service.

Dual Sealed Airboxes

The two one-piece airboxes are constructed from heat-resistant XLPE polymer and help isolate the filters from hot engine-compartment air. aFe’s filter-to-housing interface reduces the number of separate components, while clear inspection windows make it possible to view filter condition without disassembling the intake system.

Recommended Use

Recommended for Tundra owners seeking increased intake airflow, additional engine and turbocharger sound, washable oil-free filtration, and a clean enclosed-airbox design. The Pro DRY S version is especially suitable for drivers who prefer reusable filters without the maintenance of oiled filter media.

What’s Included

• 2 aFe Pro DRY S oil-free air filters
• 2 sealed Momentum GT air-filter housings with clear sight windows
• Driver-side and passenger-side XLPE intake tubes
• Silicone bellow couplings
• Premium clamps
• Required installation hardware
• aFe POWER part number 50-70100D

Emissions Notice

This product is not currently CARB exempt. According to aFe POWER, it is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. Buyers are responsible for confirming compliance with applicable emissions regulations before ordering or installation.

Installation

The Momentum GT intake installs using the factory mounting locations. Follow aFe’s supplied installation instructions and ensure that the filters, housings, intake tubes, couplings, clamps, sensors, and ventilation connections are properly seated and secured.

After installation, inspect the system for loose connections, air leaks, interference, or warning lights. Professional installation is recommended if you are unfamiliar with modern turbocharged intake systems.