aFe Momentum GT Pro 5R Intake for 2022–2026 Toyota Tundra 3.4L

The aFe POWER Momentum GT Cold Air Intake System is a high-flow dual-filter intake for the 2022–2026 Toyota Tundra equipped with the 3.4L twin-turbo V6, including gasoline and i-FORCE MAX hybrid models. This performance-oriented version features two washable and reusable Pro 5R filters with pre-oiled cotton-gauze media.

According to aFe’s testing, the system produces gains of up to 17 horsepower and 19 lb-ft of torque while flowing 17% more air than the factory intake. Measured airflow is rated at 520 CFM at 7 inches of water. Actual results can vary depending on the vehicle, operating conditions, fuel, and other modifications.

Features

• Complete dual-filter performance cold air intake system
• Dyno-proven gains of up to 17 horsepower and 19 lb-ft of torque, according to aFe testing
• Flows up to 17% more air than the factory intake
• Measured airflow of 520 CFM at 7 inches of water
• Two washable and reusable Pro 5R performance air filters
• Five progressively layered cotton-gauze filter media layers
• Filters arrive pre-oiled and ready for installation
• Dual sealed one-piece air-filter housings
• Clear sight windows allow filter inspection without housing removal
• Computer-designed and dyno-tuned XLPE intake tubes
• Heat-resistant cross-linked polyethylene construction
• Premium clamps and silicone bellow couplings
• Installs using the factory mounting locations
• aFe POWER part number 50-70100R

Fitment

• 2022 Toyota Tundra 3.4L Twin-Turbo V6
• 2023 Toyota Tundra 3.4L Twin-Turbo V6
• 2024 Toyota Tundra 3.4L Twin-Turbo V6
• 2025 Toyota Tundra 3.4L Twin-Turbo V6
• 2026 Toyota Tundra 3.4L Twin-Turbo V6

Compatible with applicable gasoline and i-FORCE MAX hybrid models. Confirm the vehicle year, engine, and intake configuration before ordering.

Pro 5R Filter Technology

The included 8-inch-tall, 360-degree radial-flow filters use five progressively finer layers of pre-oiled cotton-gauze media. Each filter has a 3-inch flange and an inverted top that increases usable filter surface area. Protective expanded metal helps support the media and resist impact damage.

Pro 5R media is a performance-oriented option designed to provide high airflow for street and track use. The filters are washable and reusable but must be cleaned and re-oiled with products intended for aFe Pro 5R filter media.

Dual Sealed Airboxes

The two one-piece airboxes are constructed from heat-resistant XLPE polymer and help isolate the filters from hot engine-compartment air. aFe’s filter-to-housing interface reduces the number of separate components, while two clear inspection windows allow the filter condition to be checked without disassembling the system.

Recommended Use

Recommended for Tundra owners prioritizing maximum intake airflow, performance, and additional engine and turbocharger sound. The Pro 5R version is particularly suitable for street or track applications where the increased airflow potential of oiled cotton-gauze media is preferred.

Customers who prefer oil-free filter maintenance should consider the aFe Momentum GT Pro DRY S version instead.

What’s Included

• 2 aFe Pro 5R pre-oiled performance air filters
• 2 sealed Momentum GT air-filter housings with clear sight windows
• Driver-side and passenger-side XLPE intake tubes
• Silicone bellow couplings
• Premium clamps
• Required installation hardware
• aFe POWER part number 50-70100R

Emissions Notice

This product is not currently CARB exempt. According to aFe POWER, it is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. Buyers are responsible for confirming compliance with applicable emissions regulations before ordering or installation.

Installation

The Momentum GT intake installs using the factory mounting locations. Follow aFe’s supplied installation instructions and ensure that the filters, housings, intake tubes, couplings, clamps, sensors, and ventilation connections are properly seated and secured.

After installation, inspect the system for loose connections, unmetered-air leaks, interference, or warning lights. Professional installation is recommended if you are unfamiliar with modern turbocharged intake systems.